performance for the 21st century
information and telephone graphic
+44 (0)800 612 9007
Home > Signal Conditioners > Signal Interface 

Signal Interface - MUW250-4


Specifications
  • Supply Voltage: 18-30Vdc
  • Current Consumption: 35mA
  • Sensor Supply: 10Vdc
  • Accuracy: 0.01%
  • Nominal Temperature range: -25 to 70°C
  • Calibration: Trimmers
  • Gain Drift: 30ppm/K
  • Display: None
  • Input Connection: Screw Terminals
  • Dimensions: 34.2 x 72 x 39mm
  • Environmental Protection Level:: IP65

£205.00 Excl. VAT



Glossary of Specifications Terms


Key Features
  • Interface module for series TLH and LWH position transducers

  • Sensor proximity in the plug connection
  • Interference-free signal transmission
  • Standardized output signals
  • 0...10 V
  • ? 10 V
  • 0...20 mA
  • 4...20 mA
  • Excellent linearity
  • Extremely low temperature drift 30 ppm/K
  • Zero point and range optionally adjustable or fixed

Benefits

The signal conditioner supplies the position transducers with a highly stable constant voltage. The wiper signal is picked off without load via a high-resistance input stage and transformed into a displacement-proportional standardized output signal.
The excellent linearity, low temperature drift and sensor-proximity of the signal conditioning process ensure full utilization of the outstanding benefits of the position transducers, guaranteeing the reliable, interference-free transmission of signals even over long distances. In the adjustable models, the zero point and range can be adjusted within wide limits using sprindle trimmers. This facility permits standardized output signals to be adjusted even if the maximum path of the transducer is not completely utilized.
The electronic circuitry is integrated into a socket to fit the DIN 43650 appliance plug. The wide operating voltage range permits to be supplied by unstabilized direct voltage sources. Selected SMD components with a wide temperature range guarantee maximum operating reliability even under extreme environmental conditions.
The MUW is connected by means of a four-pole terminal strip. It is possible to orient the connecting cable s required by turning the housing insert in 90? steps.