performance for the 21st century
information and telephone graphic
+44 (0)800 612 9007
Home > Signal Conditioners > Signal Conditioners for Position Measurement 
Inscale Potentiometers is moving!
We now sell potentiometers through the Measurement Shop website.
Clicking on most of our menu items and product links will redirect you to the Measurement Shop website.

Signal Conditioners for Position Measurement - MUK350-1

  • Supply Voltage: 18-30Vdc
  • Current Consumption: 35mA
  • Sensor Supply: 10Vdc
  • Accuracy: 0.01% FS
  • Nominal Temperature range: -25 to 70°C
  • Calibration: Trimmers
  • Gain Drift: 30ppm/K
  • Display: None
  • Input Connection: Screw Terminals
  • Dimensions: 58 x 64 x 35mm
  • Environmental Protection Level:: IP66

£329.00 Excl. VAT

Glossary of Specifications Terms

Key Features
  • Interface module for position sensors

  • Aluminium die-cast housing; Protection class IP 66
  • standardized output signals
  • 0...10 V
  • ? 10 V
  • 0...20 mA
  • 4...20 mA
  • outstanding linearity
  • extremely low temperature drift 30 ppm/K (typical value)
  • zero point and range adjustable


The signal conditioner supplies the position sensors with a highly stable constant voltage. The wiper signal is picked off without load via a high-resistance input stage and transformed into a displacement or rotationally proportional standardized output signal.
The excellent linearity, low temperature drift and sensorproximity of the signal conditioning process ensure full utilization of the outstanding benefits of the position sensors, guaranteeing the reliable, interference-free transmission of signals even over long distances.
The zero point and range can be adjusted independently of each other within wide limits using spindle trimmers. This facility permits standardized output signals to be adjusted even if the maximum stroke / angle of the sensor is not completely utilized. The electronic circuitry is accommodated in an aluminium die-cast housing conforming to protection class IP 66. The UNI-sealed threaded joint ensures a correct EMC coupling of the cable shield. The wide operating voltage range allows the unit to be supplied with an unstabilized direct voltage source. Selected SMD components with a wide temperature range guarantee maximum operating reliability even under extreme environmental conditions.
The MUK 350 is connected by means of a four-pole terminal strip